12
Sleep Mode
Tab
3/6
!
Detail
If the "Disable Sleep Mode" parameter in Administrator Management is
set to "Yes", [OFF] appears and users can select whether or not the Sleep
mode is disabled. For details, refer to "Disable Sleep Mode" on
page 12-30.
LCD Back-Light OFF
Tab
3/6
Auto Reset
Tab
3/6
Auto Reset when Account is changed
Tab
3/6
12-16
Parameter
Description
Sleep Mode
Specify the desired length of time (be-
tween 1 and 240 minutes) until the ma-
chine enters Sleep mode.
Parameter
Description
LCD Back-Light
Specify the desired length of time (be-
OFF
tween 1 and 240 minutes) until the touch
panel automatically goes off.
Parameter
Description
Auto Reset
Select the desired length of time until the
automatic panel reset operation is per-
formed and all settings return to their de-
faults.
This parameter cannot be set to "OFF" if
"Enhance Security" is set to "ON" and a
user is logged on while user authentica-
tion settings are specified. If this param-
eter was set to "OFF" before "Enhance
Security" is set to "ON", the setting for
this parameter changes to "1 min." when
"Enhance Security" is set to "ON".
30 seconds, 1 min., 2 min., 3 min., 5
min., OFF
Parameter
Description
Auto Reset when
Select whether or not the settings are re-
Account is
set to their defaults when an access
changed
code is entered or the key counter has
been removed.
Utility mode
Default setting
15 minutes
Default setting
1 minute
Default setting
1 min.
Default setting
ON
bizhub 362/282/222