Default Screen - Konica Minolta bizhub 362 User Manual

Utility mode

Default Screen

Tab
6/6
Note
The names of parameters and settings may be different when fax kit is
installed.
!
Detail
The Default LCD Screen setting specifies the default screen when the
automatic panel reset operation is performed or the machine is turned
off, then on again.
In order to check the setting after it has been changed, turn the machine
off with the main power switch, and then wait about 10 seconds before
turning it on again. The machine may not operate correctly if it is turned
on immediately after being turned off. For details on turning the machine
off and on, refer to "Turning on the main power and the auxiliary power"
on page 3-24.
bizhub 362/282/222
Parameter
Default Default
Screen LCD
Screen
Default E-
mail
Screen
Description
Select one of the following as the
mode screen given priority.
Copy, E-Mail, Scanner
Select one of the following as the
Fax mode screen given priority.
One-Touch, Search, Address In-
put
12
Default setting
Copy
One-Touch
12-21