Konica Minolta bizhub 362 User Manual page 303

Application functions
3
Touch [Set Numbering].
– To cancel the Image Settings
functions, touch [OFF].
– If the optional hard disk drive is
installed, the "Image Overlay"
function can be used. For details,
refer to "Printing copies
overlapping a different image
("Image Overlay" function)" on
page 9-27.
The Set Numbering screen appears.
4
Using the keypad, type in the starting
number under "Starting Number".
– The starting number can be set
between 0 and 999.
– Press the [C] (clear) key to reset
"Starting Number" to "1".
– To cancel the "Set Numbering"
function, touch [OFF].
5
Select the desired settings under "Pages" and "Text Density".
– If "Pages" is set to "First page only", the distribution number is only
printed on the first page of the copy. If "All Pages" is selected, the
distribution number is printed on all pages.
– Select a setting under "Text Density" to specify the density of the
printed distribution number.
6
Touch [Enter], and then touch [Enter] in the next screen that appears.
7
Specify any other desired copy settings.
8
Using the keypad, type in the desired number of copies.
9
Press the [Start] key.
Copying begins.
bizhub 362/282/222
9
9-25