Assembly Sequence Of Engine - TGB Hornet 50 Service Manual

4-3-3 Assembly Sequence of Engine

I. Assemble the Bearing of LH Crankcase.
Assemble the Oil Seal of LH Crankcase.
Assemble the Bush.
Assemble the Bearing of RH Crankcase.
Assemble the Oil Seal of RH Crankcase.
Assemble the Crank Shaft.
Assemble the RH Crankcase.
2. ¡ ·
Assemble the Oil Seal
¡ · Assemble the Bearing.
Assemble the Rear Wheel Axle.
Assemble the Lining of Rear Brake.
Assemble the Rear Wheel.
¡ ·
Assemble the Washer.
Assemble the Nut of Rear Wheel.
3. ¡ · Assemble the RH Bearing of Rear Axle.
Assemble the Cir-clip of Rear Axle.
Assemble the Washer.
Assemble the Idling Shaft.
Assemble the Rear Axle Gear.
Assemble the Cir-clip of Rear Axle Gear.
¡ ·
Assemble the Oil Seal of Drive Shaft.
¡ ·
Assemble the LH Bearings of Drive Shaft.
Assemble the Drive Shaft.
Assemble the Cover of Gear Box.
Refill the Gear Oil.
4. Assemble the Needle Roller Bearing of Con-Rod.
Assemble the Piston Ring.
Assemble the Piston.
Assemble the Piston Pin.
Assemble the Cir-clip of Piston Pin.
5. Assemble the Cylinder.
Assemble the Cylinder Head.
Assemble the Cylinder Cowling.
Assemble the Spark Plug.
Assemble the Ignition Coil.
6. Assemble the Oil Pump Driven Gear.
Assemble the Oil Pump Assy.
7. Assemble the Reed Valve.
Assemble the In-take Pipe Assy.
56