Inspection And Replacement Of Reducing Gear Oil - TGB Hornet 50 Service Manual

4-3-2 Inspection of Engine Components

4. Inspection and Replacement of Reducing Gear oil:

A. Remove the bolt of inlet on the
LH crankcase. Make sure if the
gear oil reaches the bottom of
refilling bolt.
B. Remove the bolt and drain bolt of
outlet to drain the gear oil.
C. Relock the outlet screw.
Screw Torque: 40 ~ 70kg.cm
D. Refill 90cc of TGB gear oil
from the oil inlet.
E. Tighten the oil inlet bolt.
Screw Torque: 90 ~150kg . cm
53