Removal Of Crank Case - TGB Hornet 50 Service Manual

4-3-1 Disassembly of Engine:

(Removal of Crank Case)

12. Removal of Crank Case :
A. Release Fixing Screw(1)
by diagonal step.
B. Use a special tool to lock Crank Case (2)
and Crank Shaft (3) to remove RH Crank
Case.
Special Tool: GA5000051F05
C. Use a special tool to lock LH Crank
Case(4) and Crank Shaft (3) to push out
the Crank Shaft.
Special Tool: GA5000051F05
D. Dig out the Oil Seal of RH Crank Shaft
with a screw driver.
E. Remove the bearing of RH Crank Shaft
with a special tool.
Special Tool: GA5000051F19.
50