Removal And Inspection And Assembly Of Body Parts; Removal And Inspection And Assembly Of Steering Shaft Assy - TGB Hornet 50 Service Manual

4-6 REMOVAL AND INSPECTION AND ASSEMBLY OF BODY PARTS

4-6-1Removal and Inspection and assembly of Steering Shaft Assy.

4-6-1.1 Removal of Steering shaft Assy.
A. Lift the Front Wheel
B. Remove the upper and lower brake cable and throttle cable in the right handle bar.
C. Remove the rear brake cable in the left handle bar.
D. Remove the handle bar.
E. Release the the housing nut. ¡ ] 1 ¡ ^
F. Remove the shock absorber. ¡ ] 2 ¡ ^
G. Remove the front wheel.
H. Remove the brake drum.
I. Remove the turning linkage bar ¡ ] 3 ¡ ^
J. Remove the turning joint. ¡ ] 4 ¡ ^
J. Remove the A Arm control Linkage Assy. ¡ ] 5 ¡ ^
K. Remove the steering stem lock nut. ¡ ] 6 ¡ ^
80