Assembly Of Flywheel Magneto - TGB Hornet 50 Service Manual

4-3-3 Assembly of Engine:

8. Assembly of Flywheel Magneto

A. Screw the coil.
B. Let the coil lead go through
the opening of Crank Case.
C. Clean the taper of crank shaft
and install the key .
Tap lightly to its position.
D. Install the flywheel magneto.
¡ · Avoid the drop of key and make
sure to the position of the
flywheel magneto.
E. Use tool to avoid the turning
of flywheel magneto.
Special Tool: GA5000051F04
Screw Torque:350~450 kg.cm
F. Install pick-up (1)
65