Inspection Before Running; Items To Be Inspected Before Running By Customers - TGB Hornet 50 Service Manual

1-2 Inspection Before Running

Items to be Inspected Before Running by Customers:

ITEM
Is the oil volume
1. Starter
proper?
Is the fuel volume
2 .Fuel
sufficient?
Check the distance
3 . Brake of brake handle lever
and the brake effect.
1.Is the air pressure
proper?
2.Groove should be
deep enough.
3.Unusual wear is not
4. Tire
desired.
4.Breaking and damage
are not desired.
5.Metal, stone and
other articles are
not desired.
Note: Customers should be informed to perform inspection by themselves before
running in according to this table.
CONTENT GUIDELINE
1.Check Oil Warning Lamp to see if
the oil volume is proper?
1.Check fuel volume to see if it is
enough to the destination.
1.Operate the handle lever slowly to
the brake begin to effect in order to
inspect the moving distance.
2.Test the brake with low speed
running to see the brake effect of
front and rear brakes.
1.Check if the air pressure of tire is
sufficient with a gauge or by sight. The
recommended pressure of tire is 4 p.s.i.
1.Check if the groove of tires is
enough.
1.Check landing flat of tire to see if
any unusual wear appears.
1.Check landing flat and side to see
if any breaking or damage appear.
1.Cneck if any cracking, stone or any
other article sticks into the tire.
4