Editing Motion/ Sound Notification Settings (Push Notifications); Configuring Temperature Push Notifications And Temperature Units (Fahrenheit Or Celsius) - Lorex LNC201 User Manual

14 iPad® App

14.4.3 Editing Motion/ Sound Notification Settings (Push Notifications)

Push Alarm Notifications can be set up to create a notification straight to your iPad® when
motion or sound is detected by the camera. Push Alarm Notifications go directly to the no-
tifications area on your device.
To enable Push Alarm Notifications:
1. In Camera List, tap
2. Tap Alarm notification.
3. Under Motion, select ON to enable Push Alarm Notifications when motion is detected
using video motion detection or OFF to disable.
4. Under Sound, select ON to enable Push Alarm Notifications when sound is detected
by the camera or OFF to disable. Under Sound Sensitivity, select a sensitivity for
Sound Push Alarm Notifications between 1 (lowest) and 10 (highest).
5. Under PIR, select ON to enable Push Alarm Notifications when motion is detected us-
ing the PIR motion sensor or OFF to disable.
6. Tap Update to save your settings.
14.4.4 Configuring Temperature Push Notifications and temperature Units
(Fahrenheit or Celsius)
Temperature Push Notifications can be set up to send you alerts if the temperature near
the camera goes higher or lower than the specified values. You can also select the temper-
ature unit that will be used by the system.
#LX400003; r. 2.0/14027/14265; en-US
next to the camera.
90