Configuring Night Mode Control - Lorex LNC201 User Manual

11 L-View for PC
2. Ensure Allow 3GPP connections is checked. If this setting is unchecked you will not
be able to connect to the camera with a smartphone or tablet.
3. Under Bandwidth, select your available mobile bandwidth. If you are primarily con-
necting using WiFi, you may set this setting higher.
4. Check Select resolution and frame rate automatically to have the camera auto-
matically select the resolution and frame rate based on available bandwidth. If you
leave this unchecked, configure the following:
• Under Resolution, select the resolution that will be used when connecting to the
camera using a smart phone or tablet: 320x240, 480x360, 640x400, or 1024x768.
• Under Frame rate, select the frame rate that will be used when connecting to the
camera using a smart phone or tablet between 30fps (highest) and 1fps (lowest).
5. Under Microphone, select Enable to enable audio streaming to smart phones and
tablets or Disable to disable audio streaming to smartphones and tablets.
6. Click Update to apply changes to your camera. Enter the admin user name (default:
admin) and password (default: left blank) for the camera and click OK.
7. The camera will disconnect when the setting is changed. Double-click the camera in
Camera List to reconnect.

11.3.5 Configuring Night Mode Control

Configure when the camera uses day or night mode. When day mode is on, the camera
sees in color. When night mode is on, the camera sees in black and white, and the Infrared
LED turns on to enable night vision.
To configure night mode settings:
1. Right-click on the camera you want to configure and select Night mode control.
#LX400003; r. 2.0/14027/14265; en-US
41