Editing Camera Wired Network Settings; Editing Camera Wifi Network Settings - Lorex LNC201 User Manual

13 iPhone® App
4. Tap Update to save your changes.

13.4.9 Editing Camera Wired Network Settings

Configure the camera IP address when connected using Ethernet. Select DHCP or Fixed
IP.
To edit camera wired network settings:
1. In Camera List, tap next to the camera you would like to edit.
2. Tap Camera Settings.
3. Tap Network then Wired Network.
4. Select DHCP (recommended) to allow the camera to automatically obtain an IP ad-
dress from the router or Static to use fixed IP address settings. If you select Static,
configure your IP Address, Subnet mask, Default gateway, DNS1, and DNS2.
5. Tap Update to save your settings.

13.4.10 Editing Camera WiFi Network Settings

Configure WiFi network settings for the camera.
To edit camera WiFi settings:
1. In Camera List, tap next to the camera you would like to edit.
2. Tap Camera Settings.
3. Tap Network then WiFi Network.
4. Slide WiFi to ON to enable WiFi on the camera and scan for available networks.
#LX400003; r. 2.0/14027/14265; en-US
76