Table of Contents
Advertisement
11
L-View for PC
To configure startup options:
1. Check Automatically start L-View when Windows starts to have L-View open when
your computer is turned on.
2. Check Restore the last time playing/running state when L-View starts to set L-
View to restore the camera layout and connect to all the previously open cameras
when L-View opens.
3. Click OK to save changes.
11.8.3 Fixed IP Access
The Fixed IP Access menu is for advanced users only. It must be used if you have as-
signed your camera a fixed IP address on your router.
To configure your camera to use a fixed IP address:
1. Check Connect to the camera with a fixed IP address to enable cameras to use
fixed IP addresses.
2. Click OK to save changes.
#LX400003; r. 2.0/14027/14265; en-US
51
Advertisement
Table of Contents
