Table of Contents
Advertisement
11
L-View for PC
To open the Video Settings menu:
• Click
on the top of the display area for the camera you would like to configure.
Note
The camera will disconnect after making changes to video settings. Wait about 15 seconds after clicking
Update and double-click the camera in Camera List or Auto Search to reconnect to the camera.
TIP: Change only one camera image quality setting at a time before clicking Update so
you can judge the effects.
11.7.1 Quality Tab (Configuring Resolution, Frame Rate, and Bandwidth)
The Quality tab allows you to configure image quality settings such as the camera resolu-
tion, frame rate, and bandwidth settings.
To configure image quality settings:
1. Under Bandwidth, select the upload speed of your Internet connection. If your Internet
connection is faster than 1.5Mbps, select 1.5Mbps.
2. Check Select the best resolution and frame rate automatically to have the camera
automatically adjust the resolution and frame rate based on bandwidth. Or, un-check it
to manually configure the resolution and frame rate. If you are manually configuring the
resolution and frame rate, configure the following:
• Resolution: Manually select either 320x240 (QVGA), 640x480 (VGA), 1024x768,
or 1280x800 resolution. Higher resolution will give you a better, more detailed pic-
ture, but requires more bandwidth. Lower resolution allows the camera to maintain
a higher frame rate when available bandwidth is low.
• Frame rate: Manually select the frame rate between 30fps (highest) and 1fps (low-
est). 30fps is real time video, meaning that movement in the image will appear
smooth, with no choppiness.
#LX400003; r. 2.0/14027/14265; en-US
47
Advertisement
Table of Contents
