Table of Contents
Advertisement
12
L-View for Mac
12.6.2 Video Tab (Configure General Video Settings)
The Video tab allows you to configure general video settings, such as color and brightness
settings.
2
3
4
5
To configure general video settings:
1. Right-click the camera in Camera List and click Video settings. Then, select the Vid-
eo tab.
2. Under Video Color, select Colored or Black & White.
3. Under Sharpness, select the sharpness of the image between 10 (highest) and 1
(lowest).
4. Under Place, select Outdoor if the area with the camera is brightly lit. Select Indoor if
you notice strip lines in the image or if the picture is too dark on the Outdoor video set-
ting. Select Indoor + Sunlight if the picture is too bright on the Indoor setting.
• If you select Indoor or Indoor + Sunlight, select 60Hz or 50Hz under Light Fre-
quency to adjust the camera for the frequency of your indoor lighting.
5. Under Video Flip, select Flip to flip the camera image vertically and horizontally or se-
lect Normal for normal orientation.
6. Under Brightness, select the brightness of the image between 10 (highest) and
1 (lowest).
7. Under Low Light Sensitivity, set the camera's sensitivity in low light environments be-
tween Very High (highest), High, and Normal (lowest).
8. Check Enable time display on video to turn on video time stamps or un-check it to
disable video time stamps.
9. Under Microphone, select Enabled to enable the built-in microphone on the camera
or select Disabled to disable the built-in microphone on the camera.
10. Click Update to save changes. Enter the camera admin user name (default: admin)
and password (default: left blank) and click OK. Click OK to exit the settings window.
Note
The camera may reboot after settings are changed. Wait about 30 seconds and then double-click
the camera in Camera List or Auto Search to reconnect to the camera.
#LX400003; r. 2.0/14027/14265; en-US
6
7
9
10
8
61
Advertisement
Table of Contents
