Table of Contents
Advertisement
15
Android™ App
To edit camera wired network settings:
1. In Camera List, tap
next to the camera you would like to edit.
2. Tap Camera Settings.
3. Tap Network then Wired Network.
4. Select DHCP (recommended) to allow the camera to automatically obtain an IP ad-
dress from the router or Static to use fixed IP address settings. If you select Static,
configure your IP Address, Subnet mask, Default gateway, DNS1, and DNS2.
5. Tap Update to save your settings.
15.4.10 Editing Camera WiFi Network Settings
Configure WiFi network settings for the camera.
To edit camera WiFi settings:
1. In Camera List, tap
next to the camera you would like to edit.
2. Tap Camera Settings.
3. Tap Network then WiFi Network.
4. Check WiFi to enable WiFi on the camera and scan for available networks.
5. Tap a WiFi network and enter the password to connect.
• To connect to a hidden WiFi network, tap Other. Enter the SSID, select the security
type, and tap Add. Tap the network name from the list and enter the password.
6. Wait for the update to complete.
7. Remove the Ethernet cable from the camera. It will connect to the WiFi network. When
it is connected, the blue Network LED will be on or flashing.
8. Tap Camera Settings then Camera List to exit the edit camera screen.
9. Tap the camera in the Camera List to connect. If you cannot connect, check to make
sure you have entered the correct wireless password and that the camera is in signal
range of your wireless router.
#LX400003; r. 2.0/14027/14265; en-US
115
Advertisement
Table of Contents
