Lorex L4248 Series Installation Manual
2k nvr & wire-free camera system
Hide thumbs
Also See for L4248 Series:
- Quick start manual (51 pages) ,
- User manual (82 pages) ,
- Quick start manual (54 pages)
Advertisement
Quick Links
L4248 Series - 2K NVR & Wire-Free Camera system :
Installation
What is included in the box?
*Dependent on the number of cameras included.
Before you start
The camera battery comes partially charged (due to safety regulations). Please, fully
charge the battery before use and setup. You can charge the battery pack inside or
outside of the camera.
Advertisement
Related Manuals for Lorex L4248 Series
Summary of Contents for Lorex L4248 Series
- Page 1 L4248 Series - 2K NVR & Wire-Free Camera system : Installation What is included in the box? *Dependent on the number of cameras included. Before you start The camera battery comes partially charged (due to safety regulations). Please, fully charge the battery before use and setup. You can charge the battery pack inside or...
- Page 2 The camera battery comes partially charged (due to safety regulations). Please, fully charge the battery before use and setup to take full advantage of the Wire-Free camera. You can charge the battery pack inside or outside of the camera. To charge the camera battery pack: Remove the protective film on the battery contacts and camera lens.
-
Page 3: Battery Charging Time
Battery Charging Time 2-cell : 2-4 hours • 3-cell : 3-5 hours • Setup 2K NVR Connect the included NVR power adapter to the recorder. 2. Connect the recorder to your router using the included Ethernet cable. Optional: Full Recorder Setup Connect a monitor using the included HDMI cable. - Page 4 2. Connect the included USB mouse to one of the USB ports. Setup 2K Wire-Free Camera...
- Page 5 Turn the adjustment ring counterclockwise to loosen and angle the camera. 2. Screw in the antenna. 3. Insert the battery pack into the bottom of the camera.
- Page 6 You can connect your recorder to the Lorex Cirrus app for remote access. To setup NVR with Lorex Cirrus App Download the Lorex Cirrus app by scanning the QR code on your mobile device. You can also visit Google Play Apple Store to download the Lorex Cirrus app.
- Page 7 4. Tap icon on the Device Manager screen to add device. 5. Scan the QR code on your Lorex recorder using the camera on your phone. The QR code may be located on the side or top panel of your recorder.
- Page 8 Note: If you're having trouble scanning the QR code or if your mobile device does not have a camera, tap Manually Enter Device ID. The Device ID is printed below the QR code. 6. By default the device information reads as the following. Refer to the product information to make sure the information is correct.
- Page 9 7. Enter the following information: Media Port: 3500 Password: 00000000...
- Page 10 Note: This password is temporary. Remember to update your password in the following screen. 8. Tap Save. 9. A pop-up will display prompting you to change your password, tap OK. 10. Enter a new device password in the Password Update screen. Note: The password must contain 8-15 characters.
- Page 11 Note: Up to 3 authorized users can remotely access the recorder at the same time using the Lorex Cirrus app.
Need help?
Do you have a question about the L4248 Series and is the answer not in the manual?
Questions and answers