Contents:
Digital Wireless Color
Wireless Antenna
Camera with Stand
InstALLAtIon WARnInGs
• Aim the Cameras to best optimize the
viewing area: Select a location for the
camera that provides a clear view of the
area you want to monitor, which is free
from dust, and is not in line-of-sight to a
strong light source or direct sunlight.
• Avoid installing the cameras where there
are thick walls, obstructions, or
interference (i.e. transformers, microwave
ovens or other electrical equipment)
between the Cameras and the Receiver.
• Select a location for the camera that
has an ambient temperature between
14°F~113°F (-10°C~45°C)
• Before starting permanent installation,
have another person hold the camera
for you while you verify its performance
by observing the image on a monitor.
nIGHt VIsIon
This camera includes IR LEDs, which
provide the camera with the ability to view
images in low light conditions. It is important
to use the provided power adaptor (and not
the Battery Pack Adaptor) when using the
camera for prolonged periods in low light
conditions, as the LEDs will drain the battery
more quickly than regular daytime use.
COLOR DIGITAL WIRELESS INDOOR/OUTDOOR
ACCESSORy CAMERA
LW2101AC1 SERIES - QUICk START GUIDE
Before you install the camera, carefully plan where and how it will be
positioned, and where you will route the cable that connects the
camera to the power adaptor or battery pack adaptor.
Battery Pack Adaptor
for camera
Case for camera
InstALLInG tHe CAMeRA
1. Carefully unpack the Camera.
2. Mount the stand to the wall:
• Mark the position of the
screw holes on the wall.
• Drill holes and insert the
drywall plugs as needed.
• Firmly attach the stand
to the wall using the
provided screws.
3. Attach the Antenna to the
Camera prior to mounting.
4. Place the camera in the
desired mounting position.
Tighten the thumbscrews
to secure the camera to the
Stand. Adjust the angle of
the camera until the
desired view is set.
www.lorexcctv.com
Power Adaptor
Quick Start Guide
for camera
LW2101AC1 SERIES QSG_EN_R1 Page 1