Video Tab (Configure General Video Settings) - Lorex LNC201 User Manual

Lnc200 series
Hide thumbs Also See for LNC201:
Table of Contents

Advertisement

11
L-View for PC
3. Under Preference, select your quality preference when bandwidth increases or
decreases:
• Select Video Motion to have the camera maintain the frame rate and reduce image
quality when bandwidth is insufficient.
• Select Image Quality to have the camera maintain image quality and reduce frame
rate when bandwidth is insufficient.
• Select Better Quality to have the camera maintain frame rate and increase quality
when bandwidth is sufficient.
• Select Best Quality to have the camera maintain the frame rate and increase qual-
ity to the maximum speed of the connection.
4. Click Update to save changes. Enter the camera admin user name (default: admin)
and password (default: left blank) and click OK. The camera will disconnect. Wait
about 15 seconds and then double-click the camera in Camera List or Auto Search to
reconnect to the camera.

11.7.2 Video Tab (Configure General Video Settings)

The Video tab allows you to configure general video settings, such as color and brightness
settings.
To configure general video settings:
1. Under Video Color, select Color or Black & White.
2. Under Sharpness, select the sharpness of the image between 10 (highest) and 1
(lowest).
3. Under Place, select Outdoor video if the area with the camera is brightly lit. Select In-
door Video if you notice strip lines in the image or if the picture is too dark on the Out-
door video setting. Select Indoor video + Sunlight if the picture is too bright on the
Indoor Video setting.
• If you select Indoor Video or Indoor Video + Sunlight, select 60Hz or 50Hz to ad-
just the camera for the frequency of your indoor lighting.
4. Under Video Flip, select Video Flip to flip the camera image vertically and horizontally
or select Normal for normal orientation.
5. Under Brightness, select the brightness of the image between 10 (highest) and
1 (lowest).
6. Under Low Light Sensitivity, set the camera's sensitivity in low light environments be-
tween Very High (highest), High, and Normal (lowest).
#LX400003; r. 2.0/14027/14265; en-US
48

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lnc204Lnc200 series

Table of Contents