Table of Contents
Advertisement
13
iPhone® App
4. Under Email trigger, select ON to enable email notifications or OFF to disable. Then
under Send Email, select ON to enable email notifications.
5. Under Motion sensitivity, select the motion detection sensitivity between 1 (High)
and 10 (Low). If Motion Detection Sensitivity is set to 1, motion detection will be trig-
gered if a moving object is larger than 1% of the video area. If it is set to 10, a moving
object must be larger than 10% of the video area to trigger motion detection. Tap
Email alarm to return to the Email Alarm menu.
Note
This setting does not affect the PIR motion detector.
6. Check the following trigger options for email alarms:
• Motion: Use Video motion detection to trigger email alarms. Video motion detection
looks for movement in the image to determine if there is motion. This means that
there may be false alarms caused by changes in lighting, trees moving in the wind,
etc.
• PIR: Use the PIR motion detector to trigger email alarms. The PIR motion detector
uses changes in temperatures (e.g. from a person moving around in front of the
camera) to determine if there is motion. PIR motion detection is less effective at
higher temperatures.
Note
•
You may also select both PIR and Motion to receive alarms from both motion triggers.
• Schedule: Send email alarms based on the settings configured in the Scheduling
menu.
• Disable: Disable email alarms.
7. Enter up to 3 email addresses under Recipient 1~3 that will receive email alarms.
8. Tap Update to save your changes.
Note
If you want to use a custom SMTP server to send Email messages, click SMTP Settings, enter your
SMTP server information, and tap OK.
13.4.12 Enabling Speaker Alarms
Configure the siren. The siren can be set up to go off when the camera detects motion.
This is helpful if you want to scare off intruders.
#LX400003; r. 2.0/14027/14265; en-US
78
Advertisement
Table of Contents
