Table of Contents
Advertisement
15
Android™ App
2. Tap Alarm Notification.
3. Under Motion, tap to select ON to enable Push Alarm Notifications when motion is de-
tected using video motion detection or OFF to disable.
4. Under PIR, tap to select ON to enable Push Alarm Notifications when motion is de-
tected using the PIR motion sensor or OFF to disable.
5. Under Sound, tap to select ON to enable Push Alarm Notifications when sound is de-
tected by the camera or OFF to disable. Under Sound Sensitivity, select a sensitivity
for Sound Push Alarm Notifications between 1 (lowest) and 10 (highest).
6. Tap Update to save your settings.
15.4.8 Configuring Temperature Push Notifications and Temperature Units
(Fahrenheit or Celsius)
Temperature Push Notifications can be set up to send you alerts if the temperature near
the camera goes higher or lower than the specified values. You can also select the temper-
ature unit that will be used by the system.
To configure temperature push notifications:
1. In Camera List, tap
next to the camera you would like to edit.
2. Tap Alarm Notification.
3. Under Temperature, select ON to enable temperature push notifications.
4. Under Temperature unit, select °C or °F.
5. Under Higher bound, select the high temperature value. You will receive a notification
if the temperature near the camera goes above this value.
6. Under Lower bound, select the low temperature value. You will receive a notification if
the temperature near the camera goes above this value.
7. Tap Update to save your settings.
15.4.9 Editing Camera Wired Network Settings
Configure the camera IP address when connected using Ethernet. Select DHCP or Fixed
IP.
#LX400003; r. 2.0/14027/14265; en-US
114
Advertisement
Table of Contents
