Table of Contents
Advertisement
12
L-View for Mac
8. Split-screen Controls:
•
: Click to open single camera view.
•
: Click to open 4-camera view.
•
: Click to open 6-camera view.
•
: Click to open the current display in full-screen. Press ESC to exit full-screen.
12.3 Camera List (Managing Cameras)
The Camera List is used to save connection information for your cameras, so you don't
have to re-enter the ID or password each time you connect. It also allows you to configure
certain camera settings (see 12.6 Using Camera List to Modify Camera Settings, page 59).
12.3.1 Adding Cameras to Camera List
• If the camera is on the same network as the computer, click and drag the ID from the
Auto Search List to the camera list. Then right-click the ID and click ID/Password set-
ting. Enter the camera password. If you want, you can also enter a Camera Name of
your choice for your camera. Click OK.
Click and drag camera ID from
Auto Search List to Camera List
• If you are adding a camera over the Internet, see .
12.3.2 Deleting Cameras from Camera List
• Right-click the camera in Camera List and select Delete Camera. Click OK to confirm.
12.4 Recording Video to Your Mac's Hard Drive
You can manually record video to your computer's hard drive.
#LX400003; r. 2.0/14027/14265; en-US
Right-click and select ID/Pass-
word settings
Enter a name of your choice.
Enter the camera password
and click OK
56
Advertisement
Table of Contents
