Configuring Led Control And Motion Detection Sensitivity - Lorex LNC201 User Manual

14 iPad® App

14.4.7 Configuring LED Control and Motion Detection Sensitivity

Configure the behavior of the camera status LED's. This is useful if you want the camera
to be harder to spot at night. You can also configure the sensitivity for video motion
detection.
To configure LED's and motion detection sensitivity:
1. In Camera List, tap
2. Tap Video Settings. Then tap Control.
3. Under Status LED, select one of the following:
• Normal: LED's will function as normal. For details on LED functions, see 3 Camera
Overview, page 3 or .
• Always turn off: LED's are turned off at all times.
• Turn off after network connected: LED's turn on when the camera is powered on
and turn off once a network connection is made.
4. Tap Done to return to the Control menu.
5. Under Motion Sensitivity, select the motion detection sensitivity between 1 (High)
and 10 (Low). If Motion Detection Sensitivity is set to 1, motion detection will be trig-
gered if a moving object is larger than 1% of the video area. If it is set to 10, a moving
object must be larger than 10% of the video area to trigger motion detection. Tap Con-
trol to return to the Control menu.
Note
This setting does not affect the PIR motion detector.
6. Tap Update to save your settings.
#LX400003; r. 2.0/14027/14265; en-US
next to the camera.
94