Table of Contents
Advertisement
15
Android™ App
8. Tap Update to save your changes.
Note
If you want to use a custom SMTP server to send Email messages, click SMTP Settings, enter your
SMTP server information, and tap OK.
15.4.12 Enabling Speaker Alarms
Configure the siren. The siren can be set up to go off when the camera detects motion.
This is helpful if you want to scare off intruders.
To configure speaker alarms:
1. In Camera List, tap
next to the camera you would like to edit.
2. Tap Camera Settings.
3. Tap Schedule then Speaker Alarm.
4. Under Speaker Alarm Trigger, tap to select ON to enable speaker alarms or OFF to
disable.
5. Under Alarm Loop Times, select the number of times you would like the speaker
alarm to repeat when alarms occur.
6. Select from the following speaker alarm triggers:
• Motion: Use Video motion detection to trigger audio alarms. Video motion detection
looks for movement in the image to determine if there is motion. This means that
there may be false alarms caused by changes in lighting, trees moving in the wind,
etc.
• PIR: Use the PIR motion detector to trigger audio alarms. The PIR motion detector
uses changes in temperatures (e.g. from a person moving around in front of the
camera) to determine if there is motion. PIR motion detection is less effective at
higher temperatures.
Note
•
You may also select both PIR and Motion to receive alarms from both motion triggers.
• Scheduling: Create audio alarms based on the settings set in the Schedule.
7. Tap Alarm Test to sound a test alarm.
8. Tap Update to save your settings.
15.4.13 Enabling microSD Recording
Configure video recording to the microSD card (required; not included). To playback re-
cordings saved on the microSD card, use L-View or the iPhone®, iPad®, or Android™
apps.
#LX400003; r. 2.0/14027/14265; en-US
117
Advertisement
Table of Contents
