Editing Motion/Sound Notification Settings (Push Notifications); Configuring Temperature Push Notifications And Temperature Units (Fahrenheit Or Celsius) - Lorex LNC201 User Manual

13 iPhone® App
3. Tap Done.

13.4.3 Editing Motion/Sound Notification Settings (Push Notifications)

Push Notifications can be set up to create a notification straight to your iPhone® when mo-
tion or sound is detected by the camera. Push Alarm Notifications go directly to the notifi-
cations area on your device.
To configure motion / sound push notifications:
1. In Camera List, tap next to the camera.
2. Tap Alarm notification.
3. Under Motion, select ON to enable Push Alarm Notifications when motion is detected
using video motion detection or OFF to disable.
4. Under Motion Sensitivity, select the sensitivity for video motion detection push notifi-
cations between 1 (lowest) and 10 (highest) and press OK.
5. Under Sound, select ON to enable Push Alarm Notifications when sound is detected
by the camera or OFF to disable. Under Sound Sensitivity, select a sensitivity for
Sound Push Alarm Notifications between 1 (lowest) and 10 (highest) and press OK.
6. Under PIR, select ON to enable Push Alarm Notifications when motion is detected us-
ing the PIR motion sensor or OFF to disable.
7. Tap Update to save your settings.
13.4.4 Configuring Temperature Push Notifications and Temperature Units
(Fahrenheit or Celsius)
Temperature Push Notifications can be set up to send you alerts if the temperature near
the camera goes higher or lower than the specified values. You can also select the temper-
ature unit that will be used by the system.
#LX400003; r. 2.0/14027/14265; en-US
70