Table of Contents
Advertisement
15
Android™ App
15.4.11 Enabling Email Notifications
Configure email alarms. The camera can be set up to send email alerts when motion is de-
tected. Email alarms include a .jpg attachment.
To enable email notifications:
1. In Camera List, tap
next to the camera you would like to edit.
2. Tap Camera Settings.
3. Tap Schedule then Email Alarm.
4. Under Email trigger, tap to select ON to enable email notifications or OFF to disable.
Then under Send Email, tap to select ON to enable email notifications.
5. Under Motion sensitivity, select the motion detection sensitivity between 1 (High)
and 10 (Low). If Motion Detection Sensitivity is set to 1, motion detection will be trig-
gered if a moving object is larger than 1% of the video area. If it is set to 10, a moving
object must be larger than 10% of the video area to trigger motion detection.
Note
This setting does not affect the PIR motion detector.
6. Select from the following trigger options for email alarms:
• Motion: Use Video motion detection to trigger email alarms. Video motion detection
looks for movement in the image to determine if there is motion. This means that
there may be false alarms caused by changes in lighting, trees moving in the wind,
etc.
• PIR: Use the PIR motion detector to trigger email alarms. The PIR motion detector
uses changes in temperatures (e.g. from a person moving around in front of the
camera) to determine if there is motion. PIR motion detection is less effective at
higher temperatures.
Note
•
You may also select both PIR and Motion to receive alarms from both motion triggers.
• Scheduling: Send email alarms based on the settings configured under Schedule.
7. Enter up to 3 email addresses under Recipient1~3 that will receive email alarms.
#LX400003; r. 2.0/14027/14265; en-US
116
Advertisement
Table of Contents
