Table of Contents
Advertisement
16
Configuring Camera Settings Using a Browser
5. Click Save & Apply to save email alarm settings.
Note
If you want to use a custom SMTP server to send Email messages, click Advanced, enter your
SMTP server information, and click Save & Apply.
16.4.2 Speaker Alarm (Configuring Audio Alarms)
A siren can be set up to go off when the camera detects motion. This is helpful if you want
to scare off intruders.
To configure speaker alarms:
1. Under Speaker Alarm Trigger, select one of the following alarm triggers:
• Motion: Use Video motion detection to trigger audio alarms. Video motion detection
looks for movement in the image to determine if there is motion. This means that
there may be false alarms caused by changes in lighting, trees moving in the wind,
etc.
• PIR: Use the PIR motion detector to trigger audio alarms. The PIR motion detector
uses changes in temperatures (e.g. from a person moving around in front of the
camera) to determine if there is motion. PIR motion detection is less effective at
higher temperatures.
Note
•
You may also select both PIR and Motion to receive alarms from both motion triggers.
• Schedule: Create audio alarms based on the settings set in the Schedule. see
16.4.4 Scheduling (Configuring Recording and Alarm Schedules), page 130.
• Disable: Disable audio alarms.
2. Under Alarm loop times, select the number of times the alarm will repeat.
3. Click Alarm Test to sound a test alarm.
4. Click Save & Apply.
16.4.3 SD Card (Configuring microSD Recording)
Configure video recording to the microSD card (required; not included). To playback re-
cordings saved on the microSD card, use L-View or the iPhone®, iPad®, or Android™
apps.
#LX400003; r. 2.0/14027/14265; en-US
129
Advertisement
Table of Contents
