Table of Contents
Advertisement
4
Getting Started
2. Connect the camera to your local network:
2.1.
Connect an Ethernet cable (included) to the NET port on the camera and con-
nect the other end to an available LAN port (usually numbered 1~4) on your
router (not included). The blue Network LED on the camera will glow blue when
the camera is connected to your network.
OR:
2.2.
OPTIONAL — PC and Mac only: If your router supports WPS, press and hold
the WPS button on your router until the WPS light turns on. Then, press the
WPS button on the camera within 1 minute. The camera will automatically con-
nect to your WiFi network and the Network LED on the camera will turn on.
Note
Not all routers support WPS, and the location of the WPS button on your router depends on
your router model. Check your router's instruction manual for details.
Choose the device you want to connect to the camera with from the list below to complete
the rest of the wired (Ethernet) connection process:
• To connect to the camera on iPhone, see 6 Connecting to Your Camera on iPhone®,
page 9
• To connect to the camera on iPad, see 7 Connecting to Your Camera on iPad®, page
14
• To connect to the camera on Android, see 8 Connecting to Your Camera on Android™,
page 19
• To connect to the camera on PC, see 9 Connecting to Your Camera on PC, page 24
• To connect to the camera on Mac, see 10 Connecting to Your Camera on Mac, page 29
#LX400003; r. 2.0/14027/14265; en-US
6
Advertisement
Table of Contents
