Table of Contents
Advertisement
12
L-View for Mac
3. Auto Search List: Auto Search shows cameras located on your local network (LAN).
• Double-click the camera ID to view the camera.
• Drag the camera to the Camera List to save the camera.
• Right-click the camera ID and select Web configure to configure the camera set-
tings using a browser. See 16 Configuring Camera Settings Using a Browser, page
122.
4.
Playback: Click to open Playback mode. For details, see 12.4.1 Playing Back Vid-
eo from Your Mac's Hard Drive, page 57.
5.
All Camera Action: Click to perform an action on all cameras.
6. Recording Controls:
•
Record: Click to start/stop manual recording. For details, see 12.4 Recording
Video to Your Mac's Hard Drive, page 56.
•
Snapshot: Click to take a snapshot from the camera. To view snapshots, click
and select Snapshot folder.
•
Folder: Click to open the recording folder or snapshot folder for this camera.
7. Display Area: Shows video from your camera.
• Double-click to view the camera in full-screen; double-click again to exit full-screen.
• Right-click and click Stop to close the selected camera.
• Click a display area to select it. The top of the area turns orange. L-View plays audio
from the camera in the currently selected area.
#LX400003; r. 2.0/14027/14265; en-US
55
Advertisement
Table of Contents
