Table of Contents
Advertisement
12
L-View for Mac
2. Select one of the following:
• Auto: Camera will automatically switch between day mode or night mode, based on
the amount of light in the room.
• Scheduled time of night mode: Camera will switch between day mode and night
mode at a scheduled time each day. If using this option, use the first set of drop-
down menus to select (in 24-hour time) the time the camera will switch to night
mode and the second set of drop-down menus to select when the camera will return
to day mode.
• Manual night mode control: Manually select day mode or night mode. If using this
option, under Manual, select Day for day mode or Night for night mode.
3. Click Update to apply changes to your camera. Enter the admin user name (default:
admin) and password (default: left blank) for the camera and click OK. Click OK to
exit the settings window.
Note
The camera may reboot after settings are changed. Wait about 30 seconds and then double-click
the camera in Camera List or Auto Search to reconnect to the camera.
#LX400003; r. 2.0/14027/14265; en-US
64
Advertisement
Table of Contents
