Table of Contents
Advertisement
7
Connecting to Your Camera on iPad®
5. Enter the following information:
1
2
3
5.1.
Under Name, enter a name for your camera. This can be anything of your
choice.
5.2.
Under ID, press the QR code button (
the back of the camera using the camera on the iPad. The CamID will automati-
cally be entered.
• OR: Manually enter the CamID printed on the camera.
Note
QR code setup is not compatible with the 1st generation iPad®. If you have a 1st generation
iPad®, manually enter the CamID printed on the camera into ID.
5.3.
Under Password, enter the camera password. If this is the first time connecting
to the camera, enter lorex. Press Done.
6. Tap the name of the camera in the Camera List to connect to the camera. Lorex Ping
connects to the camera.
#LX400003; r. 2.0/14027/14265; en-US
4
) and line up the QR code printed on
17
Advertisement
Table of Contents
