Connecting To Your Camera On Pc - Lorex LNC201 User Manual

9 Connecting to Your Camera on
PC
Follow the steps below to get up and running on a PC. Ensure you have completed the ap-
propriate physical setup detailed in 4 Getting Started , page 5 before you start.
• For instructions on setting your camera up for WiFi, see 9.2 PC WiFi Setup, page 26.

9.1 Connecting to Your Camera on PC

Note
For PC system requirements, see 11.1 System Requirements, page 35.
1. Install the L-View software from the CD or download it from
2. Double-click the L-View icon
Connecting to your camera over the local area network (LAN):
1. When L-View opens, it scans the local network for connected cameras. Connected
cameras are shown under Auto Search.
2. Double-click the camera under Auto Search OR click and drag the camera to a desired
screen on the display grid to connect to the camera.
3. Enter the camera password. If this is the first time connecting to the camera, the pass-
word is lorex. Click OK.
4. If you have connected to this camera before, L-View connects to the camera. If this is
the first time connecting to the camera, L-View will prompt you to create your own
password for the camera. Click OK.
#LX400003; r. 2.0/14027/14265; en-US
www.lorextechnology.com.
to run L-View.
24