10
Connecting to Your Camera on
Mac
Follow the steps below to get up and running on a Mac computer. Ensure you have com-
pleted the appropriate physical setup detailed in 4 Getting Started , page 5 before you
start.
• For instructions on setting your camera up for WiFi, see 10.2 Mac WiFi Setup, page 32.
10.1 Connecting to Your Camera on a Mac
Note
For Mac system requirements, see 12.1 System Requirements, page 54.
1. Install the L-View software from the CD or download it from
2. Extract the installer file and double-click it to run.
3. Click and drag the L-View icon to Applications to install.
Connecting to your Camera on the Local Network (Mac)
Note
Your computer must be on the same network as the camera to perform the steps below.
1. Open L-View (
) from your Applications list. L-View scans for cameras on your local
network.
2. Double-click the camera ID.
#LX400003; r. 2.0/14027/14265; en-US
www.lorextechnology.com.
29