Configuring The Camera Date And Time; Rebooting The Camera - Lorex LNC201 User Manual

13 iPhone® App

13.4.15 Configuring the Camera Date and Time

Configure the camera date and time. The camera syncs with an Internet NTP time server
to automatically provide the correct time, once you have configured your time zone and
daylight savings time settings.
To set the camera date and time:
1. In Camera List, tap next to the camera you would like to edit.
2. Tap Camera Settings.
3. Tap Admin then Date/Time.
4. Tap Time Zone.
5. Use the slider to select your time zone.
• If your region observes Daylight Savings Time, check Daylight Savings Time. Tap
Start Time and End Time, use the sliders to configure the start and end time for
Daylight Savings Time and then tap OK. Tap Back to return.
6. Tap Update to save your changes. Tap OK. The camera will reboot to apply the new
time zone.

13.4.16 Rebooting the Camera

1. In Camera List, tap next to the camera you would like to edit.
2. Tap Camera Settings.
3. Tap Admin then Reboot.
4. Tap OK to confirm.
#LX400003; r. 2.0/14027/14265; en-US
83