Microscan MS-4X User Manual page 9

Warning and Caution Summary
DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS
LED Output: .564 mW. Wavelength: 470 nm; 525 nm; 617 nm.
• Viewing the MS-4X's LED output with optical instruments such as magnifiers, eye
loupes, or microscopes within a distance of 100 mm could cause serious eye injury.
• Maximum LED output: .564 mW.
• Wavelength: 470 nm; 525 nm; 617 nm.
• Location of the MS-4X's LED aperture window:
CAUTION: Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
IMPORTANT: The MS-4X is intended for connection to a UL-listed direct plug-in power unit
marked Class II and rated 5 VDC at 3.5 Watts, or greater if using electrical accessories.
European models must use a similarly rated Class I or Class II power supply that is certified
to comply with standard for safety EN 60950.
MS-4X Imager User's Manual
WARNING
LED LIGHT
CLASS 1 LED PRODUCT
IEC 60825-1:1993+A1:1997+A2:2001
LED Aperture Window
Introduction
ix