Daisy Chain Id Status - Microscan MS-4X User Manual

Daisy Chain ID Status

Usage: Used in a daisy chain setup in cases where the host needs to know which
reader in the chain sent the data.
Definition: Each reader in a daisy chain can be assigned a one or two character ID
that will appear in front of decoded data and identify its source.
Serial Cmd: <K101,aux port mode,baud rate,parity,stop bits,data
status, daisy chain i.d.>
Default: Disabled
Options: 0 = Disabled
Note: Enable/disable and length must be the same in all readers.
Daisy Chain ID
Usage: Used in a daisy chain setup in cases where the host needs to know which
reader in the chain sent the data.
A one or two character prefix which identifies the particular daisy chain
Definition:
reader from which the data is being sent to the host.
<K101,aux port mode,baud rate,parity,stop bits,data bits,daisy chain i.d.
Serial Cmd:
status,daisy chain
Default: 1/
Options: Any one or two ASCII characters.
Important: The ASCII characters <, >, and
For <: <K101h,,,,,,,3C>
For >: <K101h,,,,,,,3E>
,
For : <K101h,,,,,,,2C>
See ASCII Character Entry Modifier
characters as hex values.
MS-4X Imager User's Manual
1 = Enabled
i.d.>
,
can only be entered as hex pairs:
for a detailed explanation of how to enter ASCII
Communications
bits,daisy chain i.d.
3-17