Microscan MS-4X User Manual page 145

Large Intercharacter Gap (Codabar)
Definition: When disabled, the spaces between characters, or the "intercharacter
gap", are ignored during the decode process.
Note: If the intercharacter space is large enough to be considered a margin,
the symbol will not decode, regardless of this parameter's setting.
Serial Cmd: <K471,status,start/stop match,start/stop
gap,fixed symbol length status,symbol length,check character type,check
character output>
Default: Disabled
Options: 0 = Disabled
Fixed Symbol Length Status (Codabar)
Definition: When disabled, the imager will accept any Codabar symbol provided it
doesn't exceed the system's maximum capabilities.
When enabled, the imager will reject any Codabar symbol that doesn't
match the fixed length.
Serial Cmd: <K471,status,start/stop match,start/stop output,large intercharacter
symbol length
output>
Default: Disabled
Options: 0 = Disabled
Symbol Length (Codabar)
Definition: This is the value against which all Codabar symbol lengths will be compared.
Serial Cmd: <K471,status,start/stop match,start/stop output,large intercharacter gap,fixed
symbol length
output>
Default: 10
Options: 1 to 64
MS-4X Imager User's Manual
1 = Enabled
status,symbol length,check character type,check character
1 = Enabled
status,symbol length,check character type,check character
output,large intercharacter
Symbologies
gap,fixed
6-21