Table Of Contents - Microscan MS-4X User Manual

Table of Contents

Chapter 1
Chapter 2
Chapter 3
Chapter 4
MS-4X Imager User's Manual
Quick Start
Step 1 Check Hardware .......................................................................... 1-2
Step 2 Connect the System ..................................................................... 1-3
Step 3 Position Imager and Symbol ........................................................ 1-4
Step 4 Install ESP.................................................................................... 1-5
Step 5 Select Model ................................................................................ 1-6
Step 6 Select Protocol and Connect........................................................ 1-7
Step 7 Locate the Symbol in the Field of View ........................................ 1-9
Step 8 Calibrate..................................................................................... 1-11
Step 9 Test Read Rate .......................................................................... 1-12
Step 10 Configure the Imager in ESP ................................................... 1-13
Step 11 Save Configuration in ESP....................................................... 1-14
Using ESP
EZ Mode .................................................................................................. 2-2
Application Mode ..................................................................................... 2-3
Menu Toolbar .......................................................................................... 2-4
View ...................................................................................................... 2-13
Navigating in ESP................................................................................. 2-14
Send/Receive Options .......................................................................... 2-15
Using EZ Trax........................................................................................ 2-17
Communications
Communications by ESP......................................................................... 3-2
Communications Serial Commands ........................................................ 3-3
Host Port Connections............................................................................. 3-4
Host Port Protocol ................................................................................... 3-5
ACK/NAK Options ................................................................................... 3-7
Polling Mode Options .............................................................................. 3-8
RS-422 Status ......................................................................................... 3-9
Auxiliary Port Connections .................................................................... 3-10
Auxiliary Port System Data Status......................................................... 3-18
Daisy Chain Autoconfigure .................................................................... 3-19
Response Timeout ................................................................................ 3-20
LRC Status ............................................................................................ 3-21
Protocol Configuration Examples .......................................................... 3-22
USB HID Interface ................................................................................. 3-23
ASCII Character Entry Modifier ............................................................. 3-32
Preamble ............................................................................................... 3-33
Postamble.............................................................................................. 3-34
Calibration
Calibration Serial Commands .................................................................. 4-2
Calibration Overview ............................................................................... 4-2
Introduction
iii