Undo All Settings To Midpos; R & B Convergence Mid - Barco R9002411 Owner's Manual

Service Mode
All settings to midposition
This item is password protected.
Highlight All settings to midposition using the arrow keys
and press ENTER to set all settings to midposition.
A confirmation menu will be displayed first.
In this menu :
ENTER will set all settings to their midposition.
EXIT will cancel the operation.
Undo all settings to midposition
When 'All settings to midposition' is selected, this action can be cancelled by selecting 'Undo all settings to midposition' in the Memory
Management menu. Press ENTER after selecting this option.
An Undo is possible as long as the projector is on the same source (i.e. same adjustment block) even when some adjustments
like geometry or convergence are readjusted. When Undo is selected, all settings are restored to their previous settings.
R & B Convergence Mid
All convergence settings for red and blue are set to midposition.
Item is password protected.
Push the cursor key
é or ê to highlight 'R & B Convergence Mid'.
Press ENTER to select.
'
A confirmation screen will be displayed first.
Press ENTER to confirm.
Press EXIT to cancel the procedure.
7 - 6 ___________________________________________________________________________ R5976101.02 BARCO CINE5 310102
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MID POS
R & B CONVERGENCE TO MID
or
Select with
then <ENTER>
<EXIT> to return
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
'
UNDO MIDPOSITION
R & B CONVERGENCE TO MID
'
or
Select with
then <ENTER>
<EXIT> to return
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE TO MID
or
Select with
then <ENTER>
<EXIT> to return
SET TO MIDPOSITION
All settings
in current blocks
will be overwritten !
<ENTER> to Confirm
<EXIT> to cancel
SET TO MIDPOSITION
All settings
in current blocks
will be overwritten !
<ENTER> to Confirm
<EXIT> to cancel
CONVERGENCE OFF
convergence setting
in current block
will be overwritten !
<ENTER> to Confirm
<EXIT> to cancel