Recommended Paper / Handling And Storing Paper - Toshiba e-STUDIO211c Operator's Manual

Recommended Paper / Handling and Storing Paper

Recommended Paper
To make copies with a fine image, use of the following sheets is recommended.
If you use copy paper other than the recommended types, ask your service technician.
Paper Type Toshiba Recommendations / Manufacturer
Plain Paper Laser Print / Hammermill
Color Copy Paper/ Hammermill
Laser Print / Hammermill
Thick Paper Color Copy Cover / Hammermill
Color Copy / Neusiedler
Special Paper AquaAce / Verbatim
Sticker labels 5165 / Avery
OHP Film CG3700 / 3M
* Be sure to use only the OHP films specified by Toshiba. Using other types of OHP films may result in
the breakdown of the copier.
Handling and Storing Paper
Pay attention to the following points:
- Avoid using paper that is specially treated or paper that was printed on another machine, and also
avoid performing double copying on the same side of paper; this may cause a malfunction.
- Do not use paper with creases, wrinkles or prone to curling, slippery paper, or rough paper; this may
cause paper misfeeds.
- Paper should be wrapped in its wrapping paper and stored in a damp-free place.
- To prevent paper from being folded or bent, store it evenly on a flat surface.
Size
(24 lb.) LD, LG, LT
(28 lb.) LD, LG, LT
(32 lb.) LD, LG, LT
(60 lb.cover) LD, LG, LT
(80 lb.cover) LD, LG, LT
2
(280 g/m ) A3, A4
LD, LT
LT
LT(125µm)
Mode
PLAIN
PLAIN
THICK 1
THICK 1
THICK 3
THICK 4
SPECIAL
THICK 2
OHP FILM
1
2
3
4
5
6
7
8
9
10
11
12
2-5