Orban OPTIMOD-FM 5500 Operation Manual page 96

2-48
INSTALLATION
same gateway address that you set in step (1.D) on page 2-44. If you do not
know the correct gateway address, you can often discover it by connecting
a Windows computer to the same Ethernet cable that is ordinarily plugged
into your Optimod. Ascertain that the computer can connect to the Inter-
net. At the command prompt, type ipconfig. The computer will return
the "Default Gateway."
5. Specify the time sync from the Optimod PC Remote software:
[Skip this step if you wish to specify the timeserver and time sync parameters
from your Optimod's front panel.]
Optimod PC Remote software can automatically set your Optimod's local time,
O , and T S
FFSET IME
PC Remote software.
If you are running Windows 2000, you cannot specify the timeserver from
your computer. However, you can still set your Optimod's clock and off-
set.
A) In Windows, navigate to the C
B) Set time zone to correspond to your local time zone.
C) In Windows, navigate to the C
tab.
D) If you are running Windows XP:
a) Check "Automatically synchronize with an Internet time server" to set your
Optimod's S
YNC
b) Set "Server" to the desired timeserver.
c) Click the "Update Now" button to synchronize your computer's clock to
the selected timeserver. If this is successful, this means that you can connect
to the selected timeserver over your network.
The I
o
NTERNET
running Optimod PC Remote on Windows 2000, you must enter the
timeserver from your Optimod's front panel as an IP address (step 4
on page 2-47).
If the timeserver you selected in Windows is a named address, not an
o
IP address, the 5500 will resolve it correctly but the IP address that
appears in your Optimod's display will be 0.0.0.0.
To use PC Remote to turn off your Optimod's automatic synchroniza-
o
tion, uncheck "Automatically synchronize with an Internet time
server" on your PC. Then click the "Update Now" button on PC Re-
mote.
E) Navigate to Optimod PC Remote's S
C button.
LOCK
to reflect the Windows settings in the machine running
ERVER
ONTROL
ONTROL
P to "24."
ERIOD
tab is not available in Windows 2000. If you are
T
IME
ETUP
P > D T
ANEL ATE AND IME
P > D T
ANEL ATE AND IME
tab and click the S
> U
TILITY
ORBAN MODEL 5500
tab.
> T Z
IME ONE
> I T
NTERNET IME
5500
ET