Orban OPTIMOD-FM 5500 Operation Manual page 112

2-64
INSTALLATION
Use either an internal modem or external modem with your computer.
a) If you are using an external modem, connect the modem to a serial port on
your PC and make sure the modem is connected to a working phone line.
b) On your PC, click "Start > Settings > Control Panel > Phone and Modem
Options."
c) Click the "Modems" tab.
d) Verify that your modem appears in the list available under "The following
Modems are installed."
e) Verify that your modem is "Attached to" the correct port.
If your modem is unavailable or not attached to the correct port, you will
need to Add it. See your Windows documentation.
f) If your modem is available in the list available under "The following
Modems are installed" and it is attached to the correct port, then click
"Properties" for that modem.
g) Make sure the port speed is set at 115200.
h) Click "OK."
B) Create a New Windows 2000 Dial-Up Connection:
a) Click "Start > Settings > Network and Dial-up Connections > Make New
Connection."
b) Once the New Connection Wizard has opened, Click "Next."
C) Create a New Windows 2000 Direct
Connection:
a) Launch 5500 PC Remote.
b) Choose "Connect > New 5500"
ORBAN MODEL 5500