Parts List; Obtaining Spare Parts - Orban OPTIMOD-FM 5500 Operation Manual

Digital audio processor
Hide thumbs Also See for OPTIMOD-FM 5500:
Table of Contents

Advertisement

OPTIMOD-FM DIGITAL
RC
resistor/capacitor
RDS/RBDS
Radio (Broadcasting) Data Service — a narrowband digital subcarrier centered at 57 kHz in
the FM baseband that usually provides program or network-related data to the consumer in
the form of text that is displayed on the radio. Occupied bandwidth is ±2500 Hz.
REF
reference
RF
radio frequency
RFI
radio-frequency interference
RMS
root-mean-square
ROM
read-only memory
SC
subcarrier
SCA
subsidiary communications authorization  a non program-related subcarrier in the FM
baseband above 23 kHz (monophonic) or 57 kHz (stereophonic)
SMT
surface-mount
S/PDIF
Sony/Philips digital interface (standardized as IEC958)
TRS
tip-ring-sleeve (2-circuit phone jack)
THD
total harmonic distortion
TX
transmitter
s
Microseconds. For FM pre-emphasis, the +3 dB frequency is 1 / (2  ), where  is the pre-
emphasis time constant, measured in seconds.
VCA
voltage-controlled amplifier
VU
volume unit (meter)
XLR
a common style of 3-conductor audio connector
XTAL
crystal

Parts List

Many parts used in the 5500 are surface-mount devices ("SMT") and are not in-
tended for field replacement because specialized equipment and skills are necessary
to remove and replace them. The list below includes substantially all of the parts
used in the 5500 (including surface-mount devices), and inclusion of a part in this list
does not imply that the part is field-replaceable.
See the following assembly drawings for locations of components.

Obtaining Spare Parts

Special or subtle characteristics of certain components are exploited to produce an
elegant design at a reasonable cost. It is therefore unwise to make substitutions for
listed parts. Consult the factory if the listing of a part includes the note "selected" or
"realignment required."
Orban normally maintains an inventory of tested, exact replacement parts that can
be supplied quickly at nominal cost. Standardized spare parts kits are also available.
When ordering parts from the factory, please have available the following informa-
tion about the parts you want:
Orban part number
Reference designator (e.g., C3, R78, IC14)
6-15
TECHNICAL DATA

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents