To Group Multiple 5500S; Operation Using The Keyboard; To Quit The Program; About Aliases Created By Optimod 5500 Pc Remote Software - Orban OPTIMOD-FM 5500 Operation Manual

3-64
OPERATION

To group multiple 5500s:

Operation Using the Keyboard

To Quit the Program

About Aliases created by Optimod 5500 PC Remote Software

Right-click A
C
LL ONNECTIONS
You can add multiple 5500 to a single group to help organize a network
of 5500. However, only one 5500 from within a group can be connected
to 5500 PC Remote at any one time.
As far as possible, PC Remote uses standard Windows conventions for navigation.
Navigate around the screens using the TAB key. Use CTRL-TAB to move to the next
tabbed screen in PC Remote.
Use the + and – keys or the left and right arrow keys on the numeric keypad to ad-
just control settings.
Use standard Windows conventions: Press ALT-F4 on the keyboard, or click the X on
the upper right corner with the mouse.
Also, please note the following behavior:

If you close the PC Remote connection from the PC, you will be given the choice
of staying connected through the ppp or disconnecting.

If you close the connection from PC Remote but choose not to close the ppp
connection, the E
ND
panel. If you then select that button, the ppp connection will close.
This behavior ensures that a user can tell from the 5500's front panel if a
remote connection is active. A user can disconnect the PC connection at
the 5500 if he or she wishes. This minimizes the likelihood of someone's
leaving a connection open while someone else tries to access that 5500.
When you A
N
DD A EW
cally given a 5500 Alias name to differentiate it from other 5500s. You can change
the name anytime in the 5500 Properties window inside 5500 PC Remote.
When you add a new 5500 or change the name of an existing 5500 Alias, an Alias
folder is created in the same location as the executable for Optimod 5500 PC Re-
mote (usually \Program Files\Orban\Optimod 5500). The folder has the same name as
the Alias name. Once you establish the initial connection to the 5500, all presets for
that 5500 are automatically copied to the Alias folder; thus, the folder contains all
the preset files for that 5500, both Factory and User. If you have backed up the 5500
in the Connections List and select N
P R button will remain displayed on the 5500's front
C EMOTE
5500 using Optimod 5500 PC Remote, your 5500 is automati-
ORBAN MODEL 5500
.
G
EW ROUP