Orban OPTIMOD-FM 5500 Operation Manual page 68

2-20
INSTALLATION
You have now completed the guided Quick Setup procedure and are in
the normal Recall P
to comply with the multiplex power ceiling specified in ITU-R BS412-9,
you will also need to set up the 5500's Multiplex Power Controller by fol-
lowing the instructions in step 20 on page 2-21.
18. Choose a processing preset.
[If you are setting up the 5500 for use as a stand-alone stereo encoder, skip this
step.]
A) Turn the knob until your desired preset is visible in the lower line of the dis-
play.
B) Press the Recall Next button to put your desired preset on-air.
This step selects the processing to complement the program format of
your station.
After this step, you can always select a different processing preset, pro-
gram the 5500 to automatically change presets on a time/date schedule,
use a GPI input to trigger preset changes, modify presets to customize
your sound, and store these presets as User Presets.
Preset names are just suggestions. Feel free to audition different presets
and to choose the one whose sound you prefer. This preset may have a
very different name than the name of your format. This is OK.
You can easily modify a preset later with the 5500's one-knob L
feature. Refer to Section 3.
Congratulations! You are now on the air with your initial sound. Feel free to
read the material in Section 3 of this manual, which describes the various presets
and how you can customize them to achieve your desired signature sound.
19. Complete Station ID (optional).
The Station ID is an optional setting that you can provide to associate the 5500
with the station providing the program material (e.g., "Z-100"). The name can be
up to eight characters long. It is used to identify your 5500 to Orban's PC Remote
application, and appears on the Main Screen when the 5500 is being controlled
by the PC Remote application.
A) Navigate to Setup > Next > T
B) Use the knob to set the each character in the ID. Use the Next and Prev but-
tons to control the cursor position.
C) When finished entering your name, press the SAVE button. If you escape to
the main screen from Setup, you can now see the station name toggle on the
main screen.
screen. However, if your country requires you
RESET
D A ID > S
IME ATE ND
ORBAN MODEL 5500
-M
ESS
ID.
TATION
ORE