Orban OPTIMOD-FM 5500 Operation Manual page 122

2-74
INSTALLATION
e) Set "Maximum
(bps)" to "115200."
f) Check "Enable hardware
flow control."
g) Check "Enable modem
error control."
h) Check "Enable mcdem
compression."
i) Make sure that no other
box is checked.
j) Click "OK."
k) Select the Networking
tab.
l) Make sure that "PPP:
Windows
95/98/NT4/2000,
Internet" ap–pears
the "Type of dial-up
server I am
field.
m)Make sure that "Inter-
net Protocol (TCP/IP) is
checked.
You may leave
"Client for Mi-
crosoft
works" checked
if you like.
n) Click "OK."
o) When the "Connection
properties" window ap-
pears, click "OK."
2. Launch an existing Windows XP modem connection.
Once you have set up a "connection" specifying a modem connection in the 5500
PC Remote application (see To set up a new connection on page 3-59), choosing
this connection from 5500 PC Remote automatically opens a Windows modem
connection to your 5500.
speed
in
calling"
Net-
ORBAN MODEL 5500