Parts List - Orban OPTIMOD 6200 Operating Manual

6-20
TECHNICAL DATA

Parts List

Parts are listed by ASSEMBLY
Widely used common parts are not listed; such parts are described generally below (ex-
amine the part to determine exact value). See the following assembly drawings for loca-
tions of components.
SIGNAL DIODES, if not listed by reference designator in the following parts list, are:
Orban part number 22101-000, Fairchild (FSC) part number 1N4148, also
available from many other vendors. This is a silicon, small-signal diode with
ultra-fast recovery and high conductance. It may be replaced with 1N914
(BAY-61 in Europe).
(BV: 75V min. @ Ir = 5µA; Ir: 25nA max. @ Vr = 20V; Vf: 1.0V max. @ If
= 100mA; trr: 4ns max.) See Miscellaneous list for ZENER DIODES (refer-
ence designator VRxx).
RESISTORS should only be replaced with the same style and with the exact value
marked on the resistor body. If the value marking is not legible, consult the schematic or
the factory. Performance and stability will be compromised if you do not use exact re-
placements.
Unless listed by reference designator in the following parts list, you can verify
resistors by their physical appearance:
Metal film resistors have conformally-coated bodies, and are identified by five
color bands or a printed value. They are rated at 1/8 watt @ 70°C, ±1%, with a
temperature coefficient of 100 PPM/°C. Orban part numbers 20038-xxx
through 20045-xxx, USA Military Specification MIL-R-10509 Style RN55D.
Manufactured by R-Ohm (CRB-1/4FX), TRW/IRC, Dale, Corning, and Mat-
sushita.
Carbon film resistors have conformally-coated bodies, and are identified by
four color bands. They are rated at 1/4 watt @ 70°, ±5%. Orban part numbers
20001-xxx, Manufactured by R-Ohm (R-25), Dale, Phillips, Spectrol, and
Matsushita.
Carbon composition resistors have molded phenolic bodies, and are identified
by four color bands. The 0.090 x 0.250 inch (2.3 x 6.4 mm) size is rated at 1/4
watt, and the 0.140 x 0.375 inch (3.6 x 9.5 mm) size is rated at 1/2 watt, both
±5% Orban part numbers 2001x-xxx, USA Military Specification MIL-R-11
Style RC-07 (1/4 watt) or RC-20 (1/2 watt). Manufactured by Allen-Bradley,
TRW/IRC, and Matsushita.
Cermet trimmer resistors have 3/8-inch (9 mm) square bodies, and are identi-
fied by printing on their sides. They are rated at 1/2 watt @ 70°C, = ±10%,
with a temperature coefficient of 100 PPM/°C. Orban part numbers 20510-xxx
and 20511-xxx. Manufactured by Beckman (72P, 68W- series), Spectrol, and
Matsushita.
, then by TYPE , then by
Orban Model 6200
REFERENCE DESIGNATOR .