ABB ACS 400 User Manual page 51

Code Name
Group 12
CONSTANT SPEEDS
1202 CONST SPEED 1
Range for all constant speeds: 0 - 250.0 Hz
Default value: 5.0 Hz
1203 CONST SPEED 2
Default value: 10.0 Hz
1204 CONST SPEED 3
Default value: 15.0 Hz
Group 13
ANALOGUE INPUTS
1301 MINIMUM AI1
Minimum value of AI1 in per cent. Defines relative analogue input value where
frequency reference reaches minimum value.
Range: 0 - 100 %
Default value: 0 %
Group 15
ANALOGUE OUTPUT
1503 AO CONTENT MAX
Defines output frequency where analogue output reaches 20 mA.
Default value: 50.0 Hz or 52 Hz depending on the selected application macro.
Note! Analogue output content is programmable. Values given here are valid only if
other analogue output configuration parameters have not been modified. Description of
all parameters is given in "ACS 400 Complete Parameter List" starting on page 55.
Group 20
LIMITS
2003 MAX CURRENT
Maximum output current.
Range: 0.5* I - 1.5...1.7* I
N
Default value: 1.5 * I
2008 MAXIMUM FREQ
Maximum output frequency.
Range: 0 - 250 Hz
Default value: 50 Hz or 52 Hz depending on the selected application macro.
** The maximum factor depending on the type of the frequency converter at 4 kHz switching frequency.
ACS 400 User's Manual
**, where I is nominal current of the ACS 400.
N N
N
User
The table continues on the next page.
S
á
41