Output Display; Menu Structure; Setting Parameter Value - ABB ACS 400 User Manual

Output Display

When the control panel is powered up, the panel displays the actual output frequency. Whenever the
MENU button is pressed and held, the control panel resumes this OUTPUT display.
To toggle between output frequency and output current, press the UP or DOWN button.
To set the output frequency, press ENTER. Pressing the UP/DOWN buttons changes the output
immediately. Press ENTER again to return to OUTPUT display.

Menu Structure

ACS 400 has a large number of parameters. Of these, only the so-called basic parameters are
initially visible. The menu function -LG- is used to make the full parameter set visible.
OUTPUT display

Setting Parameter Value

Press ENTER to view the parameter value.
To set a new value, press and hold ENTER until SET is displayed.
.
Note! SET blinks, if the parameter value is altered. SET is not displayed, if the value cannot be
altered.
Note! To view the parameter default value, press the UP/DOWN buttons simultaneously.
36
(17(5
LOC
Hz
OUTPUT
A
LOC
(17(5
OUTPUT
Parameter groups
PAR
LOC
6(7
(17(5
OUTPUT
(17(5
s
6(7
0(18
(17(5
Hz
Parameters
ACS 400 User's Manual