Output Display; Menu Structure - ABB ACS 400 User Manual

Output Display

When the control panel is powered up, the panel displays a selection of actual values, see Figure 33.
Whenever the MENU button is pressed and held, the control panel resumes this OUTPUT display.
Output current
Figure 33 Output display variables.
The frequency reference can be modified using UP/DOWN buttons when it is underlined. Pressing
UP or DOWN buttons changes the output immediately.
The reference can be modified in local control mode, but also in remote control mode if the ACS 400
is parameterised in such a way.

Menu Structure

ACS 400 has a large number of parameters. Of these, only the so-called basic parameters are
initially visible. See "Selecting Full Parameter Set" on page 32 for details on specifying the full
parameter set.
The menu consists of parameter groups and menu functions.
OUTPUT display
0.0A 0% 50.0 Hz
0.0 Hz
OUTPUT
30
Torque
0.0A 0%
OUTPUT
Menu
99 START-UP DATA
MENU
MENU
MENU
01 OPERATING DATA
10 COMMAND INPUTS
. . .
51 EXT COMM MODULE
52 STANDARD MODBUS
COPY TO DRIVE
COPY TO PANEL
LONG/SHORT MENU
Reference frequency
Cursor is visible when reference
50.0 Hz
can be modified
0.0 Hz
Actual output frequency
ENTER
MENU
Parameters
9901 LANGUAGE
ENGLISH
9902 APPLIC MACRO
9905 MOTOR NOM VOLT
. . .
4011 ACT MINIMUM
4012 ACT2 MINIMUM
. . .
ACS 400 User's Manual